Features
| Model | KA 38 BLUE – MAG |
| Motor Power Watts | 1100w |
| Tool Holder | Directly Weldon 19mm (3/4”) |
| Coolant Supply | Internal, Automatic |
| Stroke | 170mm 6.5/8” |
| Voltage | 230V / 100V |
| Magnetic Adhesion | 1100kg / 2425lb |
| Magnetic Foot | 87 x 170 mm Starr Fixed |
| Weight | 10.50kg, 23.00lb |
Advantages of New Twin Rail Slide System “HEAVY-DUTY” over machines with old dovetail system.
- Up to 10 times better stability.
- Extremely tight tolerances of the slide through the round Twin Rail system.
- The slide has no contact with the main body of the machine. The whole construction is
connected only by the highly precise and extremely stable rail system.- Reduced friction / less wear
- Low maintenance / better reliability
Result
- Improved cutter life.
- Reduced cutter breakage.
- Improved hole tolerances.
- Improved hole surface quality.
- Up to 110 mm cutting depth possible already with small machines.
THE NEW MAG-TEC SENSOR
The sensor detects how well the magnet keeps the machine on the ground.
- It is directly connected to the engine.
- If the sensor is illuminating ”RED” , the ground is dirty (rust, varnish residues, chips), the material is thinner than 6 mm or the feed rate is to high.
- The machine does not have a safe stand. The engine does not start or turns off.
- If the sensor is illuminating ”GREEN”, the magnetic holding force is optimal and the use of the machine is safe.
